Siemens

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH STANDARD 2 AXES SIN/COS 1 VPP DIRECT MEASURING SYSTEM NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH STANDARD 2 AXES SIN/COS 1 VPP DIRECT MEASURING SYSTEM

SIMODRIVE 611 UNIVERSAL HR 2-AXIS CONTROL LOOP BLOCK INCREMENTAL ENCODER SIN/COS 1 VPP ABSOLUTE VALUE ENCODER ENDAT SPEED-/TORQUE SETPOINT EXPANDAB...

SIMODRIVE 611 UNIVERSAL HR 2-AXIS CONTROL-LOOP BLOCK INCREMENTAL ENCODER SIN/COS 1 VPP ABSOLUTE VALUE ENCODER ENDAT SPEED/TORQUE SETPOINT POSITIONI...

SIMODRIVE 611 POWER MODULE, 1 AXIS, 80 A, INTERNAL COOLING, MOTOR RATED CURRENT: FEED = 28 A MAIN SPINDEL = 30 A

SIMODRIVE 611 POWER MODULE, 1 AXIS, INTERNAL COOLING, MOTOR RATED CURRENTS: Vorschub = 42 A Hauptspindel = 45 A

SIMODRIVE 611 Power module, 2-axis, 15 A, Internal heat dissipation Rated motor currents: Feedrate = 5 A Main spindle= 5 A

SIMODRIVE 611 INFEED/REGENERATIVE FEEDBACK MODULE 16/21 KW, STABILIZED, WITH INTERNAL COOLING, MAINS CONTACTOR WITH BREAK CONTACT

SIMODRIVE 611 Infeed/regenerative feedback module, 55/71 kW Controlled; Line contactor with NC contact

BRAND NEW CONDITION, GUARANTEED.

BRAND NEW CONDITION, GUARANTEED.

SIWAREX U WEIGHING ELECTRONICS (SINGLE CHANNEL VERSION), FOR CONNNECTING ONE SCALE, FOR SIMATIC S7-300 AND ET200M, RS232 INTERFACE FOR CONNECT. OF ...

SIWAREX U WEIGHING ELECTRONICS (TWO-Channel VERSION) * FOR CONNNECTING TWO SCALES * FOR Simatic S7-300 and ET200M * RS232 Interface FOR CONNECT. OF...

BRAND NEW CONDITION, GUARANTEED.

SIMATIC S5 470 ANALOG OUTPUT MODULE FLOATING F. S5-100U/ET 100U PLC 2 OUTPUTS, +- 10V

SIMATIC S5, dig input/output 482 Isolated for S5-115F 16 Inputs/Outputs 24 V DC; 0.5 A POSITIVE-SWITCHING

SIMATIC S5, CP 541, L2 interface for connection to the PG interface of a SIMATIC S5

SIMATIC S5, CP 544 faster communication proc. for point-to-point connections (serial data connection) for S5-115U/H-135U-155U/H

SIMATIC S7, memory cards for S7-300, Short design, 5V Flash EPROM, 32 KB

SIMATIC S5, Plug-in cable 734-1 from AG 15-pole to PC 25-pole 3.2 m

SIMATIC S7, MEMORY CARD FOR S7-400, LONG VERSION, 5V FLASH-EPROM, 4 MBYTES

SIMATIC S5, Interface module for CP 524 and CPU 928B 20 mA interface (TTY)

Simatic S7, MICRO Memory Card P. S7-300/C7/ET 200, 3.3 V NFLASH, 2 MBYTES

SIMATIC S5, Interface module for CP 524 and CPU 928B V.24/V.28 (RS 232C)

BRAND NEW CONDITION, GUARANTEED.

SIMATIC S5, CPU 928A CPU FOR S5-135U/155U NEW OPTION SINGLE-WIDTH

SIMATIC DP, RS485 REPEATER FOR THE CONNECTION OF PROFIBUS/MPI BUS SYSTEMS WITH MAX. 31 NODES; MAX. 12 MBIT/S, DEGREE OF PRO- TECTION IP20

SIMATIC S5 CPU 928B FOR S5-135U/155U

Simatic S7, TS Module ISDN FOR Simatic TeleService, CONNECTION ON TS ADAPTER IE, POWER SUPPLY from TS ADAPTER

SIMATIC S5,931 POWER SUPPLY MODULE FOR S5-95U/-100U, ET100U/ET200U 115/230 V AC, 24 V DC/2 A

SIMATIC S5, CPU 943 CENTRAL UNIT MODULE FOR S5-115U PLC WITH 2 INTERFACES

BRAND NEW CONDITION, GUARANTEED.

SIMATIC S5, CPU 948R CENTRAL PROCESSING UNIT FOR S5-155H, 1600 KB RAM

SINUMERIK 840C/840CE/840D/840DE ELECTRICAL MODULE FOR CNC DMP-COMPACT 16A 16 OUTPUTS 24 V DC/0.5 A FLOATING, SHORT-CIRCUIT-PROOF, W. INTEGR. FREE-W...

SINUMERIK 840C/840CE/840D/840DE ELECTRICAL MODULE FOR CNC DMP-COMPACT 8A 8 OUTPUTS 24 V DC/2 A FLOATING, SHORT-CIRCUIT PROOF, W. INTEGR. FREE-WHEEL...

BRAND NEW CONDITION, GUARANTEED.

SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 32DI 24V DC, 3MS INPUT DELAY

BRAND NEW CONDITION, GUARANTEED.

SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=160MM, 16DO 24V DC, (12X0.5A; 4X2A), DEGR. OF PROTECT. IP20,STANDARD

SINUMERIK OPERATOR PANEL FRONT OP 012, 12,1" WITH MEMBRANE KEYS AND MOUSE

SIMATIC DP, 5 ELECTRON. MODULES ET200S: 2DO RELAY(FORM C CONT.) DC24V-48V/5A, AC24V-230V/5A, 15 MM WIDTH, FIRST-UP SIGNAL, 5 PIECES PER PACKAGING UNIT

SINUMERIK OPERATOR PANEL FRONT OP 010S, 10,4" WITH MECHANICAL KEYS

SINUMERIK PCU 50 1.2 GHZ, 256 MB RAM; 24 V DC; WINDOWS XP PROFESSIONAL FOR EMBEDDED SYSTEMS (WINXP PRO EMBSYS)

SINUMERIK PCU 50.3B-C CM370; 1,5GHZ; 1 X 512MB RAM DC 24 V WINDOWS XP PROFESSIONAL FOR EMBEDDED SYSTEMS (WINXP PRO EMBSYS)

BRAND NEW CONDITION, GUARANTEED.

SINUMERIK 840D/DE CNC-HARDWARE NCU 571.5, 400 MHZ, 64 MB WITHOUT SYSTEM SOFTWARE MEMORY: NC 3 MB, PLC 128 KB PREPARED FOR PROFIBUS DP,

SIMATIC DP, Electronics module ET 200S 4AI standard I-2-wire, 4-20 mA; 13 bit, 15 mm width, for 2-wire transducer Cycle time 40 ms/module with SF L...

SINUMERIK 840D/DE NCU 573.3 PENTIUM III W/O SYSTEM SOFTWARE MEMORY: NC 2.5 MB, PLC 96 KB PROFIBUS-DP PREP.